School gutters and rainwater tanks on the KZN South Coast

Gutters collect rain from classroom roofs. Downpipes carry that water to a drainage outlet or a rainwater tank. On this school project, Hibiscus Gutters fitted gutters and downpipes across several classroom blocks and connected selected roof sections to tanks for storage.

At a school, the strip below the eaves is often the route to class. Where roof water goes matters every time it rains, especially at entrances and along the paths between blocks.

White gutter and downpipe on a yellow and blue classroom block
Classroom roofline with new guttering and a corner downpipe.

What we installed at the school

We fitted long gutter runs along the painted and brick classrooms. At a covered passage, a white downpipe steps across beneath the eaves and runs down the corner to an outlet near ground level. Along the brick block, pipework from the gutter feeds a green tank on a circular brick base.

A smaller tank sits between two classroom blocks, with a feed from each roof. Those examples show why we plan the drainage for each block: some roof sections can feed a tank, while other outlets need a route of their own.

White downpipe with an offset below the eaves beside a classroom passage
The offset below the eaves brings the downpipe to the wall.
Gutter pipe feeding a green rainwater tank beside brick classrooms
A gutter outlet feeds the green tank alongside the brick classrooms.

We make our seamless aluminium gutters to length on site, so a straight run can span the classroom eaves without a join partway along. The outlet positions still need to suit the roof and the space below it.

Planning gutters and tanks for your school

If you’re putting a proposal together for your principal or school governing body, start with a walk around the grounds. Three observations make the first conversation more useful:

  • Note which classroom roofs need attention and where rain runs onto paths or collects near doors.
  • Mark any gutters, downpipes and tanks already in place so we can assess what is worth keeping.
  • Decide what you would use stored rainwater for, such as watering planted areas, and discuss where overflow can go when a tank is full.

Our rainwater tank service covers tank selection, bases and connections to gutters and downpipes.

Common questions from schools

Can we connect a tank to existing school gutters? Often, yes. We first assess the condition and capacity of the gutters, the position of the outlet, and whether there is a practical spot for the tank and its overflow.

How much rainwater can a school collect? As a rough guide, 10 mm of rain on 100 m² of roof area, measured from above, gives 1,000 litres before losses. The amount you can store depends on the roof area feeding the tank, your tank capacity and how much water is already in it.

What does school gutter installation cost? The price depends on the length of guttering, roof height and access, the number of downpipes and whether the job includes tank connections or bases. If the budget covers only part of the school, ask for the work to be priced by block.

Request a quote for your school

Hibiscus Gutters works across the KwaZulu-Natal South Coast, including Port Shepstone, Margate, Ramsgate and Port Edward. Request a quote from Hibiscus Gutters with your school’s town, a few photos of the roof edges and any spots where water regularly collects. If you already have tanks, include those in the photos.

Leave a Comment